Vacuum former
GEISS DU 2200 x 1200 T8
Geiss DU 2200 x 1200 x 620 T8
Max. plate dimensions 2200 x 1200 mm
Max. molding area 2160 x 1160 mm
Min. molding area with adjustable window plate 1150 x 640 mm
Max. tool height 620 mm
Total output 112.7 kW
Year of manufacture 2001
Equipment:
Top heating quartz radiator, motor-driven
Bottom heating quartz radiator, pneumatic-driven
Digital radiation pyrometer in the top heating
Photocell control for automatic limitation of the pre-blowing height
Additional. Photocell for sag control
Additional cooling fans with water mist cooling
Upper stamp pneumatic
window plate adjustable by motor
Quick tool locking on the table
Siemens control system
Prepared for the installation of a plate feeder
The machine was always well maintenanced by the owner and runs well for
Production.
Vac former
GEISS DU 1550 x 1000 x 620 T8
DU 1550 x 1000 x 620 T8
Year of construction 2002
Total power 64.5 kW, 93 A
Weight approx. 7000 kg
Equipment:
Top/bottom heating quartz heater, motor driven
Pyrometer in the upper heating
Pyrometer on the machine frame to regulate the cooling time
Upper punch pneumatic
Clamping frame and window plate adjustable by motor
Smallest cutout in the window plate: 510mm x 450mm - Largest cutout: 1510mm x 975mm
Quick tool locking on the table
6 cooling fans
servo valve for vacuum + release
Vacuum bypass circuit
Siemens control
The following service work is carried out:
1. 4 Clamping frame cylinder with new sealing sets
2. Replace 1x plain bearing guide rail (tension frame left front).
3. upper heating various hoses renewed inside the energy chain
4. Lower heating new glass panels
5. Window plate adjustment at the front, reseal some lifting cylinders
6. Replace front door seal
7. Renew the PTFE pneumatic hoses on the front door